Відео

I've done all the work to remove that and....................it's gone. Someone removed that before me 🤣

Got a mk1 tt on the way. So new subscriber 😊, But the remote central locking won’t work and when you try to lock it manually the alarm goes off. So car can’t be secured. Appreciate any ideas / direction to take ?

This job ruined me last night . 10 hours messing around , then to find out it has to come back off cause the seals were leaking 🤦‍♂️

Dude, you're the man.

Very clear explanation thank-you, now just getting access lol

What are the side effects of this problem?

Thank you! You saved my day 🙂

Also best to cover drain hole with finger as oil tube removed. Gives you an extra second or two to position drain plug right beside your finger so no oil is lost

After sucessfully changing the blown dipped beam with improved bulbs I noticed both the front side lights we out. The bulb warning was not triggered like the dipped beam. It seems this is normal(?) Suggest everyone checks theirs. (H6W) Still under 40k on my 2006 1.8 2wd.

Excellent

How did you know it was the regulator not the alternator mine the yellow battery comes on them rpm shuts off then Speedo on code 20 it was 8.4 volts new battery

Glad I came across this. First time owner of a 1.8T (01 Beetle), previous owner attempted "the delete" on a lot of things. Broke the SAI, broke the connectors on the n249 and n75, most emission related hoses broken or rotted. I'll be running a Frankenturbo F21 so I think I'll be keeping the n249 and n75 in place until I can get a proper tune and reliable way to control boost.

Thanks for taking your valuable time to bring us along.

Have great road trip hope it goes well sounds epic

Are u going to watch footey

What are you doing there?

Have a great trip guys

"It's been faultless so far" "It's been perfect" I mean, come on....

Welldone honesty is allways the best policy

I tried to bridge the connector as you did, but nothing happends. I have new fans, new controle module, new fuse box, all sensors new. But If I unplug the #16 fuse, the fans spinns. What now?

I managed to change mine without removing the caliper and disk. I removed the allen bolt, sprayed Plusgas all round the sensor. left it 15 mins. Then put a screwdriver in the bolt hole and wriggled it forcibly back and forth while yanking on the cable. Worth a try before removing the brakes.

Nice one mate very helpful thanks. So many people go all around the houses. 😊

Great solution.

Thanks for video. Just bought quatro and without this I'd put front axle on the dolly trailer😅

Hopefully you still around. Ive had to change the clutch cylinder. Will the peddle stay up once u put it in or will it need bleed before it stay up on its own when pressed? Mine currently flips to the floor still after replacing the cylinder. Im hoping to bleed it tomorrow.

Whats the advantage from going from oem to trackslag or creation? Any performance increase?

Thank you very much for this video saved me big time. My carrier bolts were rounded beyond recognition and getting the disc out without removing them helped big time 👍

This didn't reset mine. It actually seems like there is something broken beneath the shifter. I'll have to pull it apart to see what is going on underneath and then try this, thanks!

Still like this on my june 2024 order from Autodoc.

You dont need L plates with a full car license on a 50cc do you….🤔

Is it cause you want to have a lovely time, the day you went to Bangor and are trying to do it for under a pound?

Great vid ❤❤❤

I watch all your videos but how the heck did you get that controller out situ I’ve been trying to get the top bolt off for hours I can’t find any easy way

Nice and warm down south....😂

Go Bryn

Funny looking TT that pal!

Morning bryyn

Raving mad pal ! 🤣👏👏

Good luck to you 🙂

Watched this twice, thank you so much, the most informative video I've seen in quite a while

Im trying to remove my turbo, bolt for the turbo support has snapped, how do you normally get around this problem to free the turbo from the bracket?

So it's basically an overly complicated blow off valve.

for me dont work low speed when open ac... if bridge wires on thermo switch work both high and low speed also work if remove fuse 16...im change already thermo switch and thermostat but is same no fans with ac..what need change next?only resistor mode can fix it?

Audi has discontinued the following hoes and I need it my car is been down for two months because I can’t find this hose. Can you help? VW AUDI SEAT coolant hose oil cooler 1J0121086AA 1.8T 20V

Thanks for sticking to it. Your my S3 8L video workshop manual

hi my fan stopped working, i did the wire bridge test and only low speed is working, does that mean relay has gone? thanks

Could you send me the link to the air filter you have?